WOBBLER FÜR OBERFLÄCHEN-FISCHKÖDER 3D Druckmodell

Beschreibung

Miniature wobbler is suitable for catching a predator in difficult conditions - where the use of baits of other types will be less effective. as well as large bodies of water. The objects of fishing are mainly peaceful and predatory fish of medium sizes: large perch, roach, asp, bream. Often, the bait is attacked by pike and zander, which come out to chew on shoals in the warm season. A loop for attaching a leash is mounted in the front part. Depending on the specific conditions of fishing, the strength and tempo of jerks should vary, introducing variety into the behavior of the walker on the surface of the water.
In the middle of the bait’s body there is a weight with edges that moves freely along the channel. The wobbler has excellent flight performance, excellent stability on retrieves, and expressive active play. The versatility and good catchability of the bait were also noted; the wobbler works on all types of predators and performs well on short twitching with fast retrieve. The wobbler has good acoustics and an expressive vibration amplitude. The bait also works well on slow retrieves, but with a different nature of play on the horizontal plane.
The recommended depth for its use is up to 1.5 m.
This model has a length of 40 mm and an approximate bait weight of 4-10 grams. For the assembling you need 0.8mm stainless spring steel wire, 2-3 split rings, hooks, 2 Bolt DIN 912 M3x8 inbus (with a cylindrical head) and 2 hexagon nut M3

It is recommended to use printing with supports, the plastic will additionally need to be glued. ABS, PLA, PET-G plastic is suitable. Filling is not less than 20% (the total weight of the bait depends on the filling, it is recommended to use scales when selecting additional weight in the middle, the recommended weight of the finished bait is 5 grams). Do not use printing parameters that greatly reduce the quality of the printed part, because then it may be necessary to additionally process the forming surfaces of the two parts for the perfect fit of the surfaces. Before use in water, it is desirable to additionally process it with a paint coating to ensure integrity and strength. Before coating, you can additionally apply bright colors to attract the attention of predatory fish..