怪盗キッド - MAGIC KAITO - 3D プリント 3Dプリントモデル

$ 11.00 USD
怪盗キッド - MAGIC KAITO - 3D プリント 3Dプリントモデル
$ 11.00
  • 利用可能フォーマット:
  • アイテム ID:
    544931
  • 日付: 2024-12-08
  • コレクション:
    No
  • 印刷 準備:
  • 3D スキャン:
    No
  • 成人コンテンツ:
    No
  • PBR:
    No
  • AIトレーニング:
    No
  • ビュー:
    2159

説明

KAITO KID - MAGIC KAITO - 3D PRINT

Magic Kaito (Japanese: まじっく快斗, Hepburn: Majikku Kaito) is a Japanese manga series written and illustrated by Gosho Aoyama. It premiered in Shogakukan's shōnen manga magazine Weekly Shōnen Sunday in June 1987. It is Aoyama's first serialized manga. The story depicts the adventures of Kaito Kuroba, a teenage magician who secretly operates as the internationally-wanted phantom thief Kaito Kid.

Though the series was popular in its initial run, Aoyama placed it on hiatus in late 1988—after two tankōbon volumes had been published—in order to focus on Yaiba and later Case Closed. Since then, new installments have been produced very sporadically, often years apart; a third volume was compiled in 1994, a fourth in 2007, and a fifth in 2017; three more chapters were published in 2024. Notwithstanding this, Kaito Kid has (along with several associated characters) made numerous appearances in Case Closed and various spinoff media, achieving much wider recognition through them.

フォーマットが必要ですか?

異なるフォーマットが必要な場合、サポートチケットを開き、注文をしてください。3Dモデルをこれらに変換できます: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. フリーフォーマット変換
3D シーンは変換しません .step、.iges、.stp、.sldprt などの形式。!

使用情報

怪盗キッド - MAGIC KAITO - 3D プリント - このロイヤリティフリーの3Dモデルは、基本ライセンスまたは拡張ライセンスに従って、個人および商用目的で使用できます。

基本ライセンスは、デジタル広告、デザインおよび視覚化プロジェクト、ビジネスソーシャルメディアアカウント、ネイティブアプリ、ウェブアプリ、ビデオゲーム、物理またはデジタル最終製品(無料および有償)など、ほとんどの標準的な使用事例をカバーしています。

拡張ライセンスには、基本ライセンスで付与されるすべての権利が使用制限なしで含まれており、ロイヤリティフリーの条件の下で、3Dモデルを無制限の商用プロジェクトで使用できます。
詳細を読む

返金保証をしていますか?

はい。商品を購入し、説明やレンダリングに破損など見つけた場合、我々は出来るだけ早く問題を解決するよう努力いたします。もし問題が解決しない場合、我々が注文をキャンセルし。アイテムのダウンロード後24時間以内に返金をいたします。詳細な条件を読む

キーワード

このアイテムにコメントはありません。