Box Organizer Modelo de Impressão 3D

Box Organizer Modelo de Impressão 3D stl, De Upcrid

3D MODEL DESCRIPTION
Hello friend, today I wanted to bring on my profile, a simple box to deposit pins and bolts, or maybe screws, and better still office material, in short, what do you think, you can safely deposit it in this Organaizer, with nice side decorations.

The box has the dimensions of 159 x 87 x 100 mm, does not need supports, and is very easy to print, just put it vertically.

The box is modular, you can print several, and fit them with each other, through the rails that I realized both below, that above the box, I also applied a tolerance of 0.50 to the carts, in fact to allow you to slide forward and back, without great difficulty.

I want to remind you, that to this project, I will bring other designs and different sizes, and as I make them, I will update the project itself.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance "tolerance standard of all printers"If you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that’s right for you, I’ll also remind you to leave me a like if you appreciate my work.

Good press friend

3D PRINTING SETTINGS
Layer 0.20
Temp 205° / 50° PLA - 230° / 65° PETG
Infill 10%
Top and Bottom Layer 4
Perimeter Layer 3
No support
Speed 50/60 mm/s