INSERÇÕES DE JOGO DE TABULEIRO DE JORNADA DE DARWIN - ORGANIZADOR DA AM-MEDIA MULTICOLOR COM QUALQUER IMPRESSORA 3D Modelo de Impressão 3D

Descrição

**THIS IS THE BEST LOOKING INSERTS FOR DARWIN'S JOURNEY THAT YOU CAN PRINT!**

**FEATURES**
This is a 3D printable inserts for the board game DARWIN'S JOURNEY, designed to organise ALL the components of the game inside the original box. Thanks to the interlocking lids, you can place the box horizontally or vertically without worries, as nothing will be able to fall out of the box. **Inserts support sleeved cards**

Easy to print, **100% support-free**
They can be printed on **ALL 3D printers** with a minimum build volume of **180x180mm**
They can be stored in either **horizontal or vertical position**
All boxes have an interlocking lid, **no magnet required!**
**LayeredArt Lid** for unique decorative designs! (lids without decoration are also included)
Support sleeved cards

**NEW LAYERED-ART LIDS

**LayeredArt Lid:** Introducing the amazing new LayeredArt lid! These decorated lids take the aesthetics of your game to an epic level, creating unique, themed effects that will blow your friends' minds. Each lid is a work of art that transforms your gaming experience into something truly unique. These designs are created by switching filaments during the printing process, allowing for intricate patterns and designs. The best part? You can achieve this with any single-filament 3D printer! Detailed instructions are included, specifying the exact layer number for filament changes, making it easy for anyone to get amazing results.

**LAYERED-ART WITH ANY 3D PRINTER !**
You can printing the LAYERED-ART LIDS with a **normal 3D printer**. Each colour is set to a different height to allow for filament changes USING M600 G-CODE OR PAUSE COMMAND. I personally recommend PrusaSlicer, which makes it damn easy to set colour change pauses, but of course you can do this with any other slicer.  I've written an article on this topic: https://***.ly/3DFE2Pz - you can find screenshots (in the file package) with colour changes, which make it easier to setup your slicer.

**SCALE/DIMENSIONS**
Please do not alter the dimensions of the file as this may make the model unprintable.

**IMPORTANT INFO**
The interlocks of the lids are designed with tolerances suitable for printing with simple home printers, in fact all my inserts are tested with an old Ender 3 first model. I recommend that you print a single insert with its lid first and test the fit before proceeding with anything else, if the fit is too tight it means that you need to calibrate your printer correctly. The **total** size of the organiser is 285x285x42mm. Although rarely, it may happen that due to differences in production, printing and edition, box sizes may vary slightly. Please measure the **inside** of the game box to confirm compatibility.

© 2025 www.am-media.biz - This is a third-party accessory designed by AM-MEDIA. All product names are trademarks of their respective owners, which are in no way associated or affiliated with AM-MEDIA