autonomous hydrogen fuel cell concept car autonomus 3D 打印模型

easy-to-print car model kit in scale 1:43 for self assembly
fdm 3d-printable with standard settings

attention! steel axles with a diameter of 1 mm need to be ordered separately!

print settings depends on your printer.
for this model tpu plastic was used for tires and pla for all other parts
recommended 0.4 mm nozzle 0.2 mm layer height

assembly notes:
remove supports accurately
drill all holes with 1 mm hand drill
use 1.2 mm drill for axle holes in car body
cut the axles in this length: 4x15 mm (side doors); 3x39 mm (roof doors); 2x38 mm (wheels); 2x5mm (front door).
assembly all doors and parts together. don't bend the axles!
glue the windows and tank door on the car body