Brooklyn NETS NBA 3D 打印模型

3D MODEL DESCRIPTION
Hello friend, today on my channel, I wanted to bring one of the many logos that I love very much, namely that of the Brooklyn NETS, known basketball team.

The logo is completely modular, I divided the pieces in such a way as to print them with simplicity, and assemble them with extreme ease.

In addition to this logo, I’m going to make the entire collection of basketball logos, always in a small size, and right to display in your room, in your office, or where you like.

The frame size is 193 x 1** x 30, the project does not need supports.

Follow me , to stay updated on all my creations, and if you have a logo in particular, that you like a lot, let me know in the messages section, I will reply in a very short time.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance "tolerance standard of all printers"If you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good press friend for anything, contact me via messages.

3D PRINTING SETTINGS
Layer 0.15 or 0.20
Temp 205° / 50° PLA --- 230° / 65° PETG
Infill 10%
Top and Bottom Layer 4
Perimeter Layer 3
No support
Speed 50/60 mm/s