STL TWO FACES BUST 3D PRINT 3D 打印模型

Contents - WinRAR file to unzip

Pre-adjusted in 1/6 and 1/4 scale.

The 3D model is prepared and ready for 3D printing. Printing test performed on 1/6 scale and elegoo mars 2 pro printer.

1/4 scale STL file. 1/6 scale STL file (chitubox file with supports), the same one I used for printing tests. You can use it as a reference to place your supports if you prefer.

Tip for a good impression. Make sure your printer is calibrated, use the correct time for your resin/printer.

After printing, wash the part and remove the supports with the help of pliers, remove carefully. Cure your piece of a finish with sandpaper. Paint and collect.

This project has 3 parts to print

The STL is for personal use Only.

If you have any questions or maybe an issue with the model (change the scale, error in the files) please do not hesitate to contact us.

Thank You!