D25B4V01 Iris ball shutter mechanism 3d print free Ücretsiz 3D Modeller

- Hazır formatlar:
STEP (.step) 916.02 kb
- Koleksiyon:No
- Baskıya Hazır:No
- 3D Tarama:No
- Yetişkin(+18) içerik:No
- PBR:No
- AI Eğitim:No
- Görüntülemeler:1564
- Tarih: 2024-09-20
- Ürün ID:530794
Part are designed for 3d printing. It is best to use resin material, and some hand work is necessary to make it work well.
The parts should be smooth enough,so usually you need to sand some areas.
If you use PLA/ABS material,you need to try to make the part as smooth as possible.Some M2X6 (4pcs) and glue are needed to assemble the parts.
Before using glue ***ween parts "bottom drive-UP" and "bottom drive-DOWN", you should try to test if the mechanism work well.
When you drive the part "bottom drive",the 4 blades open or close gradually. When it is open,the "mouth" diameter is 25mm.
STL and STEP format files are included.
There is a video on Youtube which shows similar structure. https://youtu.be/3dwmSeUinQE?si=qy1KigJATOmfR0rG
Baskıya Hazır: HayırFarklı bir formata ihtiyaç duyuyorsanız lütfen destek ekibimize bir talep açarak ihtiyacınızı belirtiniz. 3D modelleri şu formatlara dönüştürebiliriz: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 3d sahneleri dönüştürmüyoruz ve .step, .iges, .stp, .sldprt gibi formatlar.!