family guy griffin model printing miniature assembly file stl-obj for 3d printing fdm-fff dlp-sla- 3D Model

Açıklama

follow me
facebook: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks
istagram: cody3d1 https://www.instagram.com/cody3d1/
twitter: https://twitter.com/cody3d
artstation: https://www.artstation.com/cody3d
youtube: https://www.youtube.com/channel/ucegptsyuzqwuu1fow04_mkw?view_as=subscriber
family guy (griffin) stl-obj file optimized for fdm-fff dlp-sla-sls printing
assembly figure

in total family guy is composed of 2,584 mil points
all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

dimensions approximately fdm-fff z 10 cm x 22 cm y 19 cm
z 3,9 inch x 8,6 inch y 7,4 inch

dimensions approximately dlp-sla-sls z 4,7 cm x 8,7 cm y 9,3 cm
z 1,8 inch x 3,4 inch y 9,3 inch

however, the dimensions can be changed with each slicer
all files are already in place for optimal printing

family guy 3d model was designed to get a clean print result, without considering printing material consumption, however, you are free to rotate, or scale,
every part of the model in the most convenient way for you.
each file has been checked and repaired with netfabb
the parts of the model are already positioned for 3d printing
compatible with every slicer- simplify3d, care, slic3r, etc ...
all the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

family guy (the griffins) is an american animated sitcom, created by seth macfarlane in 1999 for fox.

the protagonist family of the cartoon is the irreverent representation of the typical american family. their stories are out of reality, with continuous flashbacks at various points in the story that explain the behavior of the characters. the storylines of the episodes very often do not follow a logical sense, but are always endowed with a strong humorous-demented vein. the insertion, with the passing of the seasons, of new characters has further delved into this point, succeeding in the intent to make the series gain immense popularity.

the program was suspended in 2002, but has been revived on other networks such as tbs and adult swim and on dvd, gaining a consensus so broad as to induce fox to produce new episodes in 2005. other media are derived from the series, such as the film the secret story of stewie griffin from 2005, video games and a trilogy of star wars parody called laugh pure, pile of hair !. in 2009 the character cleveland brown gave birth to a spin-off: the cleveland show.

on 12 february 2019 the series was renewed for an eighteenth season.

the series has won seven emmy awards out of 24 nominations.

recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts,
it is recommended to print with a 4-5 skirt

quality
layer height: 0.1mm*
initial layer thickness: 0.3mm
bottom/top pattern: lines
horizontal expansion: 0.04mm (when entering 0.04mm index, the 3d printer perceives the model as monolith, i.e. as having no hidden layers).
*layer height 0.1mm is recommended for a better quality for the printed model. however, the printing time will double.

as a stl file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. this is why we only test print the most difficult segments of
the model’s parts.

the model's parts have been tested and printed in pla. in case you need advice where to get your filaments from, check our partner's website.

speed setups:
infill speed: 30mm/s
outer shell speed : 30mm/s
inner shell speed: 20mm/s
top/bottom speed: 20mm/s
support speed: 50mm/s
travel speed: 150mm/s
skirt speed: 30mm/s
amount of slower layers: 4
infill:

infill pattern: grid
line distance: 1.5mm
infill overlap: 20%
infill layers: 0
support:

enable support: check
placement: everywhere
overhang angle: 30°
x/y distance: 0.7mm
top distance: 0.2mm
bottom distance: 0.2mm
stair step height: 0.5mm
join distance: 0.7mm
area smoothing: 0.6mm
use towers: check
pattern: grid
line distance: 1.5mm