skeleton fpv bd 3D 打印模型

描述

3 inch fpv drone powered by 2s batteries. even this model does not involve any difficulty in printing even for the less experienced. with a simple and lightweight design the drone turns out to be a lot of fun to fly. all projects are tested as can be seen from the flight test photos and video.
link video test: https://youtu.be/azpfb2hbdp4

required material:

• 1 connector xt60
  
• 4 screw m2x5 (for frame.)
  
• 2 screw m2x6 (for support xt60)
  
• 2 screw m2x5 (for support camera)
  
• 
  

print settings for pla

• nozzle temperature: 195°
  
• plate temperature: 55°
  
• infill: 50%
  
• support: no
  
• 
  

print settings for petg

• nozzle temperature: 230°
  
• plate temperature: 55°
  
• infill: 50%
  
• support: no
  
• 
  

components:

• camera: foxeer razer nano 1200tvl
  
• flight controller: jhemcu ghf420aio f4 osd
  
• motor: racestar 1103 br1103b
  
• vtx: mini txt5848 48ch 5.8g
  
• buzzer: hglrc ws2812
  
• proppeler: gemfan hurricane 3018
  
• battery: zop power 7.4v 850mah
  

打印准备: 否