skeleton fpv bd 3D Принт Модель

$ 5.00
У вас є $0.00 Кредити. Купити Кредити
skeleton fpv bd 3D Принт Модель
$ 5.00
Видалити! Додати в закладки
  • Колекція:
    No
  • Готовність до друку:
    No
  • 3D Скан:
    No
  • Зміст для дорослих:
    No
  • PBR:
    No
  • Перегляди:
    2730
  • Дата: 2021-06-06
  • ID Товару:
    351720
3 inch fpv drone powered by 2s batteries. even this model does not involve any difficulty in printing even for the less experienced. with a simple and lightweight design the drone turns out to be a lot of fun to fly. all projects are tested as can be seen from the flight test photos and video.
link video test: https://youtu.be/azpfb2hbdp4

required material:

  • 1 connector xt60
  • 4 screw m2x5 (for frame.)
  • 2 screw m2x6 (for support xt60)
  • 2 screw m2x5 (for support camera)


print settings for pla

  • nozzle temperature: 195°
  • plate temperature: 55°
  • infill: 50%
  • support: no


print settings for petg

  • nozzle temperature: 230°
  • plate temperature: 55°
  • infill: 50%
  • support: no


components:

  • camera: foxeer razer nano 1200tvl
  • flight controller: jhemcu ghf420aio f4 osd
  • motor: racestar 1103 br1103b
  • vtx: mini txt5848 48ch 5.8g
  • buzzer: hglrc ws2812
  • proppeler: gemfan hurricane 3018
  • battery: zop power 7.4v 850mah
Готовність до друку: Ні
Потрібно більше форматів?
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!

skeleton fpv bd 3D Принт Модель stl, від Bosca3D

drone quadcopter fpv flysky frsky racing freestyle 3d printed modeling model toy pla frame
До даного товару немає коментарів.