Sisipan - Penyelenggara Normandia yang Tak Gentar oleh am-mediabiz Model Cetak 3D

Sisipan - Penyelenggara Normandia yang Tak Gentar oleh am-mediabiz Model Cetak 3D Dari ammedia3d

**FEATURES**
This is a 3D printable inserts for the board game Undaunted Normandy, designed to organise ALL the components of the base game inside the original box. Thanks to the interlocking lids, you can place the box horizontally or vertically without worries, as nothing will be able to fall out of the box. **Inserts support sleeved cards**

Easy to print, all files are **SUPPORT-FREE**
They can be printed on **ALL 3D printers** with a minimum build volume of **180x180mm**
They can be stored in either **horizontal or vertical position**
All boxes have an interlocking lid, **no magnet required!**
**Experiment with multi-colors printing** and you will create a unique kit!
Support sleeved cards

**MULTICOLOR WITH ANY 3D PRINTER !**
You can also print the lids in different colors. Each lid features symbols representing the content inside (e.g., Americans, Germans, etc.) as visible in our photos. The lids are designed to be print in different colors using a normal 3D printer. Each color is set to a specific height, making it easy to change filaments using the M600 G-CODE or the pause command. I personally recommend PrusaSlicer, which makes it damn easy to set colour change pauses, but of course you can do this with any other slicer.  I've written an article on this topic: https://www.am-media.biz/mastering-multicolor-3d-printing-with-prusaslicer-a-comprehensive-guide-420/ - in the files package you can see a preview of the slicer with the color changes and their respective heights.

**SCALE/DIMENSIONS**
Please do not alter the dimensions of the file as this may make the model unprintable.

**IMPORTANT INFO**
The interlocks of the lids are designed with tolerances suitable for printing with simple home printers, in fact all my inserts are tested with an old Ender 3 first model. I recommend that you print a single insert with its lid first and test the fit before proceeding with anything else, if the fit is too tight it means that you need to calibrate your printer correctly. The **total size of the organizer is 265x179x56**, although rarely, it may happen that due to differences in production, printing and edition, box sizes may vary slightly. Please measure the **inside** of the game box to confirm compatibility.

© 2025 www.am-media.biz - This is a third-party accessory designed by AM-MEDIA. All product names are trademarks of their respective owners, which are in no way associated or affiliated with AM-MEDIA