Modelo inovador de design 3D para espaços modernos Modelo de Impressão 3D

Modelo inovador de design 3D para espaços modernos Modelo de Impressão 3D blend, De graphicore3d

This 3D model embodies innovation and modernity, specifically designed to meet the needs of contemporary spaces. It features intricate details and smooth shapes, making it ideal for a variety of projects, from interior design to architectural models.

3D printing settings

Printer Type:

FDM (Fused Deposition Modeling) or SLA (Stereolithography) based on the desired finish.
Layer Height:

Recommended: 0.1 - 0.2 mm for detailed prints.
For faster prints, a layer height of 0.3 mm can be used, but detail may be lost.
Infill Density:

Recommended: 20-30% for a good balance of strength and material usage.
For more structural integrity, increase to 50%.
Print Speed:

Recommended: 50-60 mm/s for optimal quality.
Can be adjusted based on printer capability.
Temperature Settings:

PLA: Nozzle temperature: 190-210°C; Bed temperature: 50-60°C.
ABS: Nozzle temperature: 220-250°C; Bed temperature: 90-110°C.
Resin (for SLA): Follow the manufacturer’s recommendations.
Support Structures:

Use supports for overhangs greater than 45 degrees.
Consider using breakaway or soluble supports for easier removal.
Cooling:

Enable part cooling fan for PLA prints.
For ABS, minimize cooling to prevent warping.
Manufacturing Instructions:
Preparation:

Ensure the 3D printer is calibrated and clean.
Load the appropriate filament or resin based on the desired material.
Slicing:

Use slicing software (e.g., Cura, PrusaSlicer) to prepare the model.
Import the STL file and adjust settings as per the recommendations above.
Generate the G-code for FDM printers or prepare the print file for SLA printers.
Printing:

Start the print job and monitor the first few layers to ensure proper adhesion.
Keep an eye on the print progress for any issues such as warping or misalignment.
Post-Processing:

For FDM prints, remove supports carefully and sand any rough edges if necessary.
For SLA prints, wash the model in isopropyl alcohol (IPA) and cure it under UV light.
Optionally, paint or finish the model as desired.
Final Inspection:

Check the model for any defects or imperfections.
Ensure all parts are securely attached and functional.
This guide provides a comprehensive overview of the settings and manufacturing instructions for successfully producing the Innovative 3D Design Model for Modern Spaces. If you have any specific requirements or adjustments, feel free to ask!