50 tonluk köprülü vinç mekanik ve elektrik şeması 3D Model

SUMMER SALE
Discount 50% OFF
$
11.00 USD
- Yazardan ürün desteği talep edin
- Hazır formatlar:
- Ürün ID:411493
- Tarih: 2022-08-20
- Animasyon:No
- Dokulu:No
- Rigged:No
- Malzemeler:Yes
- Low-poly:No
- Koleksiyon:No
- UVW mapping:No
- Kullanılan Eklentiler:No
- Baskıya Hazır:No
- 3D Tarama:No
- Yetişkin(+18) içerik:No
- PBR:No
- Geometri:Polygonal
- Unwrapped UVs:Unknown
- Görüntülemeler:5460
Açıklama
50 ton bridge crane mechanical and electrical diagramIncluding: electrical drawings, mechanical drawings, list of purchased parts, instructions, and can be produced directly according to the drawings.
General Overhead Crane Instruction Manual
This manual is used for electric hooks, grab buckets, electromagnetic, dual-purpose, triple-purpose, explosion-proof, insulation, hanging beam, large lift, slow speed, double speed, double trolley, ground control for indoor and outdoor fixed span operations. Installation and commissioning, delivery acceptance and use and maintenance of bridge cranes.
This manual introduces the typical structure and usage characteristics of various types of general-purpose overhead cranes. Please refer to the attached drawings for the specific structure, performance, main technical parameters and external dimensions of the general-purpose bridge crane manufactured by our factory.
The technical basis for the design and manufacture of general overhead cranes is GB3811 "Code for Design of Cranes". The on-site experiment and acceptance of general bridge cranes are based on GB/T14405 "General bridge cranes.
Heavy Machinery" National Standard.
The conditions of use for the normal supply of general overhead cranes are:
1. The power supply used by the crane is three-phase AC, the frequency is 50Hz, and the voltage is 380V. The allowable voltage fluctuations on motors and appliances are +10 and -15 of the rated voltage.
2. The working conditions of the crane are:
①Indoor temperature is -5~40℃; outdoor temperature is -25~40℃.
② There shall be no flammable, explosive and corrosive gases in the working environment (except for explosion-proof cranes).
③ The radiant heat temperature of the lifting items to the hook part of the crane shall not exceed 300℃. If it exceeds the above range, it will be handled according to special requirements. 3. The running track of the crane shall comply with the provisions of GB10183 standard. Baskıya Hazır: Hayır
Daha fazla formata mı ihtiyaç duyuyorsunuz?
Farklı bir formata ihtiyaç duyuyorsanız lütfen destek ekibimize bir talep açarak ihtiyacınızı belirtiniz. 3D modelleri şu formatlara dönüştürebiliriz: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Serbest Format Dönüştürme3d sahneleri dönüştürmüyoruz ve .step, .iges, .stp, .sldprt gibi formatlar.!
Kullanım Bilgileri
50 tonluk köprülü vinç mekanik ve elektrik şeması - Telifsiz bu 3D modeli, Temel veya Genişletilmiş Lisans uyarınca hem kişisel hem de ticari amaçlarla kullanabilirsiniz.Temel Lisans, dijital reklamlar, tasarım ve görselleştirme projeleri, ticari sosyal medya hesapları, yerel uygulamalar, web uygulamaları, video oyunları ve fiziksel veya dijital son ürünler (hem ücretsiz hem de satılan) dahil olmak üzere çoğu standart kullanım durumunu kapsar.
Genişletilmiş Lisans, Temel Lisans kapsamında verilen tüm hakları, kullanım sınırlaması olmaksızın içerir ve 3D modelin Telifsiz koşullar altında sınırsız ticari projede kullanılmasına olanak tanır.
Daha fazla oku
Para İade Garantisi sağlıyor musunuz?
Evet, sağlıyoruz. Bir ürün satın aldığınızda çözünürlükte ya da tanımda bir hata bulduğunuzda problemi en kısa sürede çözmeye çalışacağız. Hatayı düzeltemezsek siparişinizi iptal edeceğiz ve sipariş tarihiniz göz önünde bulundurularak paranız size 24 saat içinde iade edilecektir. Daha fazla detay için tıklayınızAnahtar Kelimeler
Bu ürün için yorum bulunmamaktadır.
English
Español
Deutsch
日本語
Français
한국의
Italiano
Nederlands
Türkçe
Português



















