cyclone filter for household vacuum cleaner nozzle v01 3d-print 3D Baskı Modeli

Açıklama

can be connected with a vacuum cleaner or a fan through adapter

simple model of cyclone filter for household vacuum cleaner nozzle can be used in kitchen, bathroom, garage, lavatory, basement and toilet etc.


the model is made with much attention to details.

do not need to buy a finished product, print the number of pieces you need as many different colors

pipe size to connect 50 mm


include 2 parts.

all real sizes you can see in the photos.

everything can be seen in the photo.

the principle of operation of the cyclone collector is as follows:
a mixture of dust and gas enters the dust box along a horizontal pipe, rotates and settles at high speed down the barrel wall, and the “dust”
enters the vacuum cleaner below under strong centrifugal force and its own gravity. and the mini-broom with a mini-shovel gas discharges upwards
central tube.

turbocharged cyclone dust collector is widely used in all industries, such as machinery, textiles, household appliances, food, grain, coal,
cement, building materials, heat output, metallurgy, steel, sweeper, plant for removing dust and personal processing dust production center.

can completely replace: a bag type dust removal plant; it has: a simple production process, ultra-low production costs, low operating costs,
dust removal efficiency and constant pressure, the main maintenance-free benefits are incomparable for removing bag-type dust.

fix the collector on the lid of the tank for collecting dust and chips using 4 self-tapping screws

you can use any old paint bucket as a dust collector, for example. the main condition is tight hermetic closure of the lid on the container

points for attention:
to ensure normal use of the cyclone dust collector, the intake air volume should be much larger than the dust content, the minimum air intake
should be greater than 70%. otherwise, “dust choking”, i.e., a large amount of dust, will be detected in a vacuum. this is because the principle
of operation of the cyclone dust collector differs from the bag dust collector, therefore it is absolutely impossible to use a cyclone dust
collector as a pump unit, and store the suction nozzle in dust. if you do this, because there is no air in the dust collector or the air
content is too low, the discharge may only be “ash”!

placement of models on the printer table when printing is shown in the photo


the model can be printed as a 3d model, as well as produced on cnc machines.

made in spaceclaim, tested in the manufacture of the master model of the product.

this is a fully solid-state version for 3d-print, this is not a scan version.

at the photos you can see the contours of the models on screens with stl or obj files, it is enough
to understand the possibility of printing a model or producing a model by a cnc machine

it is possible to model anyone another model according to your size or drawings and sketches.

attention! this item is a digital 3d model (*stl *obj file format) for artcam, aspire, cut3d, cura
anyone software applications for cnc and 3d printers.

its files for cnc routers and 3d printers.

not a vectric, not a bitmap file, not a g-code. you buy a digital model image file for the manufacture of the product,
and not the product itself as a physical unit of goods made of glass or wood.

non-commercial use only.