Робот Deep Diver 3D Принт Модель

Опис

Overall Build

• A short, wide body standing on two thick legs. The torso is the dominant mass, the legs are secondary. Height is roughly 1.5 times its width. Posture is upright.

Torso

• The core is a large, rounded diving-bell or boiler shape. The front has a large circular viewport with a crosshair frame, resembling a submarine porthole. The surface is covered in riveted panels, pipes, and circular fittings.
• The top has a small raised structure like a hatch or periscope.

Arms

• Articulated mechanical arms extend from the upper torso. They are arranged radially around the body, not in pairs. Each arm is segmented with ball joints and ends in a three-fingered claw or pincer. Two arms are mounted on the upper back, two on the sides at mid-height, and two lower down near the waist. The arms are posed in different positions in each image, showing full articulation.

Legs and Feet

• Two heavy, armored legs with large knee and ankle joints. The feet are wide, flat platforms with a mechanical tread-like base, designed for stability rather than speed.

Coloration

• The renders show a weathered monochrome finish: off-white or light grey for the main body panels, with dark grey or black for the arms, joints, and feet. There is simulated grime and wear in the panel lines.

(Make sure to check if there are any problems with the manifold edges. Most 3d printing aps will have an option to auto fix them, but its also preferable to load them in a viewer for additional checks.
The model has an extent between -1 and 1, you can customize its size and modify it freely. You may reduce or increase the polygon count alongside the vertices freely based on your specific needs. 
The colors may turn out a bit different from the original ones seen in the images, depending on the printer used and how it's printed. 
The Zip Contains stl, 3mf, obj, dxf, File Formats.)