Mass Effect - 2 Printable models - STL - Personal Use 3D Принт Модель

Printable 3d models from Mass Effect. STL format.

All models include the ability to set the backlight. There is also a display stand for each product.

Models are perfect for cosplay, as the high accuracy of the details of the models and the presence of illumination are worthy of the highest admiration of the audience.
The models will be a wonderful addition to any collection of collectors and fans, as they are able to deliver a lot of warm positive emotions due to high detail, attention to detail and the ability to place LED lighting.

Collection includes 2 models:

- M-25 Hornet (https://3dexport.com/3dmodel-m-25-hornet-mass-effect-printable-stl-files-426563.htm)
- Scorpion (https://3dexport.com/3dmodel-scorpion-blaster-mass-effect-printable-stl-files-426564.htm)

For more details, we recommend that you familiarize yourself with the lot you are interested in on its page.

________________________________________________________________________

M-25 Hornet model include:

- 43 stl files to 3d printing (biggest part demensions: 122x128x45mm).
- 5 stl files - stand.
- Digital Instruction for assembling.
- List of components you will needs for assembling.

The M-25 Hornet model assumes a presence of LED backlight.

M-25 Hornet Dimensions: 461 x 287 x 55 mm (18.1x11.3x2.2")

List of components needs for assembling M-25 Hornet with LEDs lighting:

- 3-4mm LEDs
- 24ohm resistors
- 1xAAA batteries slot
- 8x8mm button switch
- M3 screws
- wires
- 4 pcs round magnets 10*5mm
- 8mm rod (390mm length) with 2 pcs M8 nuts
- M3 insert nuts (3x5x4mm) - 2 pcs

________________________________________________________________________

Scorpion model include:

- 30 stl files to 3d printing (biggest part demensions: 159x133x28mm).
- 4 stl files - stand.
- Digital Instruction for assembling.
- List of components you will needs for assembling.

The model assumes a presence of LED backlight.

Scorpion Dimensions: 357x199x50mm (14x7.8x2")

List of components needs for assembling Scorpion with LEDs lighting:

- 3-4mm LEDs
- 1xAA batteries slot
- 8x8mm button switch
- M3 screws
- wires
- 4 pcs round magnets 10x5mm

________________________________________________________________________

FOR PERSONAL USE ONLY. NOT INTENDED FOR COMMERCIAL PRINTING. Готовність до друку: Ні