Of a hydrofoil board with a rigid wing sail 3D Модель

SALE ENDS
$
15.00
- Доступні формати: Autodesk 3DS MAX (.max) 47.65 MBAutodesk FBX (.fbx) 98.74 MBIGES (.iges) 2.18 MBWavefront OBJ (.obj) 70.77 MBSolidWorks (.sldprt) 11.50 MBSTEP (.step) 8.51 MBStereolithography (.stl) 16.14 MBImage Textures (.jpg) 2.19 MB
- Анімована:
- Текстури:
- Скелет:No
- Матеріали:
- Лоу-полі:No
- Колекція:No
- UVW зображення:No
- Плагіни:No
- Готовність до друку:No
- 3D Скан:No
- Зміст для дорослих:No
- PBR:No
- Геометрія:Polygonal
- Розгорнуті UVs:Unknown
- Перегляди:3875
- Дата: 2022-07-29
- ID Товару:408761
Conceptual design of a hydrofoil sailboard with a rigid wing sail
The project was developed on the basis of a rigid wing sail. Now it can rotate and
tumble to the side. The board itself is equipped with two-tier high-speed hydrofoils,
which allow at low speeds to transfer the board to planing mode, and at
increase in speed - completely lift the board out of the water, thereby reducing
resistance.
The 3D model is made in the form of: hull parts, sail parts, as well as a ballast centerboard and keel.
All peace and goodness. Готовність до друку: Ні
ДетальнішеThe project was developed on the basis of a rigid wing sail. Now it can rotate and
tumble to the side. The board itself is equipped with two-tier high-speed hydrofoils,
which allow at low speeds to transfer the board to planing mode, and at
increase in speed - completely lift the board out of the water, thereby reducing
resistance.
The 3D model is made in the form of: hull parts, sail parts, as well as a ballast centerboard and keel.
All peace and goodness. Готовність до друку: Ні
Потрібно більше форматів?
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!
Of a hydrofoil board with a rigid wing sail 3D Модель max, fbx, iges, obj, sldprt, step, stl, jpg, від vexpert
sail yacht concept conseption sailboard windsurfing nautical proektДо даного товару немає коментарів.