English
Español
Deutsch
日本語
Polska
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदी
bladeless desktop fan Modèles 3D en vedette
$
15.00
Vous avez $0.00 Crédits. Acheter Credits
- Formats disponibles: Stereolithography (.stl) 298.33 kb
- Collection:No
- Largeur en millimètres:140
- Prêt à imprimer:
- 3D Balayage:No
- Contenu adulte:No
- PBR:No
- Vus:3631
- Date: 2018-10-11
- ID de produit:212843
this small device is a handy desktop fan that works without propellers.
thanks to its particular design does not require blades to works.
inside the base i decided to mount an 80x80x15mm pc fan; the fan draws air from the bottom of the base and pushes it into the upper ring creating an increase in pressure.
only the base file (003.stl) needs to be printed with supports.
what you need to complete the assembly is:
1 x desktop pc fan 80x80x15mm.
4 x m4 x16mm screws.
1 x on / off switch (21mm of diameter).
1 x 12 volt transformer.
assembly:
mount the computer fan inside the base using 4 m4x16mm screws. solder fan and transformer wires to a switch.
insert the fan inner (001.stl) into the fan outer (002.stl), no gluing required.
mounte the fan inner and fan outer on the base.
En savoir plusthanks to its particular design does not require blades to works.
inside the base i decided to mount an 80x80x15mm pc fan; the fan draws air from the bottom of the base and pushes it into the upper ring creating an increase in pressure.
only the base file (003.stl) needs to be printed with supports.
what you need to complete the assembly is:
1 x desktop pc fan 80x80x15mm.
4 x m4 x16mm screws.
1 x on / off switch (21mm of diameter).
1 x 12 volt transformer.
assembly:
mount the computer fan inside the base using 4 m4x16mm screws. solder fan and transformer wires to a switch.
insert the fan inner (001.stl) into the fan outer (002.stl), no gluing required.
mounte the fan inner and fan outer on the base.
Avez besoin de plus de formats?
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
Si vous avea besoin d’\autre format veuillez ouvrir un billet d’\assistance et demandez le. Nous pouvons convertir les modèles de 3D en: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nous ne convertissons pas les scènes 3D et des formats tels que .step, .iges, .stp, .sldprt.!
bladeless desktop fan Modèles 3D en vedette stl, De Tatasala
air fan bladless cooling desktop diy electronics ventilatorAucun commentaires sur ce produit.
-30%
CheeseBread.3D
Accessories
-20%
CheeseBread.3D
Accessories
-20%
CheeseBread.3D
Accessories
-20%
CheeseBread.3D
Accessories
-20%
CheeseBread.3D
Accessories
-30%
CheeseBread.3D
Accessories