English
Español
日本語
Polska
Français
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदी
bladeless desktop fan 3D Druckmodell
SALE ENDS
$
7.50
- Verfügbare Formate: Stereolithography (.stl) 298.33 kb
- Sammlung:No
- Breite in Millimeter:140
- Druckfertige:
- 3D Scan:No
- Erwachsene:No
- PBR:No
- Betrachter:3619
- Datum: 2018-10-11
- Artikel-ID:212843
this small device is a handy desktop fan that works without propellers.
thanks to its particular design does not require blades to works.
inside the base i decided to mount an 80x80x15mm pc fan; the fan draws air from the bottom of the base and pushes it into the upper ring creating an increase in pressure.
only the base file (003.stl) needs to be printed with supports.
what you need to complete the assembly is:
1 x desktop pc fan 80x80x15mm.
4 x m4 x16mm screws.
1 x on / off switch (21mm of diameter).
1 x 12 volt transformer.
assembly:
mount the computer fan inside the base using 4 m4x16mm screws. solder fan and transformer wires to a switch.
insert the fan inner (001.stl) into the fan outer (002.stl), no gluing required.
mounte the fan inner and fan outer on the base.
Mehr lesenthanks to its particular design does not require blades to works.
inside the base i decided to mount an 80x80x15mm pc fan; the fan draws air from the bottom of the base and pushes it into the upper ring creating an increase in pressure.
only the base file (003.stl) needs to be printed with supports.
what you need to complete the assembly is:
1 x desktop pc fan 80x80x15mm.
4 x m4 x16mm screws.
1 x on / off switch (21mm of diameter).
1 x 12 volt transformer.
assembly:
mount the computer fan inside the base using 4 m4x16mm screws. solder fan and transformer wires to a switch.
insert the fan inner (001.stl) into the fan outer (002.stl), no gluing required.
mounte the fan inner and fan outer on the base.
Sie brauchen mehr Formate?
Falls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D Szenen und Formate wie .step, .iges, .stp, .sldprt usw!
Falls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D Szenen und Formate wie .step, .iges, .stp, .sldprt usw!
bladeless desktop fan 3D Druckmodell stl, Von Tatasala
air fan bladless cooling desktop diy electronics ventilatorEs gibt keine Kommentare zu diesem Artikel.
-50%
CheeseBread.3D
Accessories
-50%
CheeseBread.3D
Accessories
-50%
CheeseBread.3D
Accessories
-50%
CheeseBread.3D
Accessories
-50%
CheeseBread.3D
Accessories