3DP2BLROD50A-3D Printable Iris mechanism 3D प्रिंट मॉडल

HALLOWEEN PRE SALE 50% OFF
$9.90 -50%
$ 4.95 USD
आपके पास है $0.00 क्रेडिट्स. क्रेडिट्स खरीदें
3DP2BLROD50A-3D Printable Iris mechanism 3D प्रिंट मॉडल
$9.90 -50%
$ 4.95
बुकमार्क हटाएं इस आइटम को बुकमार्क करें
  • कलेक्शन:
    No
  • प्रिंट के लिए तैयार:
  • 3D स्कैन:
    No
  • एडल्ट कंटेन्ट:
    No
  • PBR:
    No
  • व्यूस:
    2170
  • तिथि: 2022-09-24
  • आइटम ID:
    415409
Iris mechanism or taiji mechanism designed for 3d print. There are 2 leaves. Then you rotate the "Drive Part"or the middle plate, the center hole can open or close gradually. The center hole is diameter 50mm, the outer size is diameter 120mm and thickness is 8.2mm. To assemble the parts togther,some M2 screws are needed.
Parts are designed for 3d printing. It is best to use resin material when 3d printing. And you may need to sand some parts due to the 3d printing quality.
Parts should be printed separately and then assembled together.
क्या आपको और फ़ॉर्मेट्स चाहिए?
अगर आपको किसी अलग फ़ॉर्मेट की जरूरत है, तो कृपया हमें कन्वर्शन अनुरोध भेजें। हम 3D मॉडल को इसमें कन्वर्ट कर सकते हैं: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. हम 3D दृश्यों को कन्वर्ट नहीं करते हैं और .step, .uges, .stp, .sldprt जैसे प्रारूप।!

3DP2BLROD50A-3D Printable Iris mechanism 3D प्रिंट मॉडल step, से monk3947

irisdiaphragm irismechanism mechanisms 3dprinting robotic mechanicalengineering shutters
इस आइटम के लिए कोई कमेंट्स नहीं है।