s64f and s64e skycrane 3D मॉडल

$150.00
- उपलब्ध फ़ॉर्मेट्स: 3D Studio (.3ds) 12.70 MBCinema4D (.c4d) 7.92 MBCollada (.dae) 12.38 MBArchiCAD (.dxf) 14.17 MBAutodesk FBX (.fbx) 25.53 MBWavefront OBJ (.obj) 13.21 MB
- बहुभुज:41738
- वर्टिसिस:43676
- एनिमेटेड:No
- टेक्सचर:
- रिग्ड:No
- सामग्रियां:
- ज्यामिति:Polygonal
- व्यूस:6776
- तिथि: 2013-03-01
- आइटम ID:66330
s-64f skycrane with nose radar and water tank for fire suppression and s-64e skycrane with winch for heavy lift and construction.
s-64f
polygons 41738
vertices 43676
s-64e
polygons 39894
vertices 37766
this model is only artistic representation of the subject matter. i made it for a flight magazine illustration. if you like the model please rate it.
the s-64 skycrane is an american twin-engine heavy-lift helicopter. it is the civil version of the united states army's ch-54 tarhe.
the aircrane can be fitted with a 2,650-gallon (~10,000 litre) fixed retardant tank to assist in the control of bush fires, and it has proved itself admirably in this role.
s-64 aircranes have been sold to the italian and korean forest services for fire suppression and emergency response duties. those in the manufacturer air-crane fleet are leased worldwide to organizations, companies, and federal government agencies for either short-term or longer term use in fire suppression, civil protection, heavy lift construction, and timber harvesting.
general characteristics
• crew: 2 (pilot, co-pilot), plus room for one rear-facing observer
• capacity: up to 5 total persons
• payload: 20,000 lb (9,072 kg)
• length: 70 ft 3 in (21.41 m (fuselage))
• rotor diameter: 72 ft 0 in (21.95 m)
• height: 18 ft 7 in (5.67 m)
• disc area: 4070 ft? (378.1 m?)
• empty weight: 19,234 lb (8,724 kg)
• max. takeoff weight: 42,000 lb (19,050 kg)
• powerplant: 2 ? pratt & whitney jftd12-4a (t73-p-1) turboshaft engines, 4,500 shp (3,555 k w) each
performance
• maximum speed: 109 knots (126 mph, 203 km/h)
• cruise speed: 91 knots (105 mph, 169 km/h)
• range: 200 nmi (230 mi, 370 km) max fuel and reserves
• rate of climb: 1,330 ft/min (6.75 m/s)
और पढ़ेंs-64f
polygons 41738
vertices 43676
s-64e
polygons 39894
vertices 37766
this model is only artistic representation of the subject matter. i made it for a flight magazine illustration. if you like the model please rate it.
the s-64 skycrane is an american twin-engine heavy-lift helicopter. it is the civil version of the united states army's ch-54 tarhe.
the aircrane can be fitted with a 2,650-gallon (~10,000 litre) fixed retardant tank to assist in the control of bush fires, and it has proved itself admirably in this role.
s-64 aircranes have been sold to the italian and korean forest services for fire suppression and emergency response duties. those in the manufacturer air-crane fleet are leased worldwide to organizations, companies, and federal government agencies for either short-term or longer term use in fire suppression, civil protection, heavy lift construction, and timber harvesting.
general characteristics
• crew: 2 (pilot, co-pilot), plus room for one rear-facing observer
• capacity: up to 5 total persons
• payload: 20,000 lb (9,072 kg)
• length: 70 ft 3 in (21.41 m (fuselage))
• rotor diameter: 72 ft 0 in (21.95 m)
• height: 18 ft 7 in (5.67 m)
• disc area: 4070 ft? (378.1 m?)
• empty weight: 19,234 lb (8,724 kg)
• max. takeoff weight: 42,000 lb (19,050 kg)
• powerplant: 2 ? pratt & whitney jftd12-4a (t73-p-1) turboshaft engines, 4,500 shp (3,555 k w) each
performance
• maximum speed: 109 knots (126 mph, 203 km/h)
• cruise speed: 91 knots (105 mph, 169 km/h)
• range: 200 nmi (230 mi, 370 km) max fuel and reserves
• rate of climb: 1,330 ft/min (6.75 m/s)
क्या आपको और फ़ॉर्मेट्स चाहिए?
अगर आपको किसी अलग फ़ॉर्मेट की जरूरत है, तो कृपया हमें कन्वर्शन अनुरोध भेजें। हम 3D मॉडल को इसमें कन्वर्ट कर सकते हैं: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. हम 3D दृश्यों को कन्वर्ट नहीं करते हैं और .step, .uges, .stp, .sldprt जैसे प्रारूप।!
अगर आपको किसी अलग फ़ॉर्मेट की जरूरत है, तो कृपया हमें कन्वर्शन अनुरोध भेजें। हम 3D मॉडल को इसमें कन्वर्ट कर सकते हैं: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. हम 3D दृश्यों को कन्वर्ट नहीं करते हैं और .step, .uges, .stp, .sldprt जैसे प्रारूप।!
डाउनलोड करें s64f and s64e skycrane 3D मॉडल 3ds c4d dae dxf fbx obj से tartino
s-64f s-64 s-64e skycrane sky crane helicopter lifter fire suppression heavyइस आइटम के लिए कोई कमेंट्स नहीं है।