피벗축 3D 프린트 모델

설명

A rotating axis for a laser cutter.
The axis is designed for maximum versatility.
Clamps glasses of any shape! You can even clamp bottles!

The hangers are made from 8mm plywood using a laser cutter.

V-shaped aluminum profile 2040 500mm 2 pcs (**********) - http://bi2go.ru/2034479X23183 
Polished shaft 8mm, 200mm long, 1 pc (**********): - http://bi2go.ru/2034479X23184
Bearing KP-08 2 pcs (**********): - http://bi2go.ru/2034479X23185
TB6600 Stepper Motor Driver 1pc (**********): - http://bi2go.ru/2034479X23186
Nema17 stepper motor 1pc (**********):: - http://bi2go.ru/2034479X23187
Pulley 16T B8 W8 (1pc) (**********): - http://bi2go.ru/2034479X23188
Spring with an internal diameter of more than 8 mm 1 pc (**********):: - http://bi2go.ru/2034479X23189
Door seal profile E (9x4mm) (**********): - http://bi2go.ru/2034479X23192
Set of screws and nuts (**********): - http://bi2go.ru/2034479X23190
М3х10мм - 3шт
М4х16мм - 4шт
М4х10мм - 2шт
М5х16мм - 20шт

M4 Nuts - 6 pcs
M5 Washers - 8 pcs
T-Slot Nuts (Series 20) - 12 pcs (**********): - http://bi2go.ru/2034479X23191

The pulley will need to be modified: press out the front flange and hot-fit it onto the part "Передний конусный упор.STL"