3d printing molds for casting mp dragon 3d print model 3D 프린트 모델

3d printing molds for casting mp dragon 3d print model 3D 프린트 모델 stl, 발신 mrladaga

this mold is for casting.print it on a 3d printer and put it together.after assembly it is recommended to wrap the thread with a thread for greater stability.
if you want to get a metal ax, fill the mold with molten paraffin or molding wax.after the paraffin has cooled down, gently disassemble the mold.the extracted form of paraffin is covered with a layer of gypsum.gypsum is suitable for anyone.attention, allow the gypsum to dry out during the day.then the gypsum form will need to be freed from paraffin.place the plaster mold in the oven until all paraffin flows into the prepared container.
we obtained a plaster mold ready for casting metal.in order for the gypsum form to withstand the heat and not crack.we`ll put it in a suitable container.attention in order to heat the mold, make a spring from the metal wire and apply voltage from the welding machine to both ends of the wire.then sprinkle the mold with sand.the spring in the sand will heat the mold, and the sand will reliably hold the mold.now you can pour metal.after the metal has cooled down, remove the mold from the container and clean it from the gypsum.the resulting casting should be processed and polished in places where it is necessary.
then rejoice at the result.

i can make a mold for waxing
recast and reselling the file is prohibited!
if you wish to sell kits of this object, please contact me.
鑄造模具 also can see my cartoon, in the format of vr 360. https://youtu.be/i21xb7buidw
have a nice day :d