INTERNAL PULLER 3D Модель

$ 10.00
INTERNAL PULLER 3D Модель
$ 10.00
Видалити! Додати в закладки
  • Анімована:
    No
  • Текстури:
    No
  • Скелет:
    No
  • Матеріали:
  • Лоу-полі:
    No
  • Колекція:
    No
  • UVW зображення:
    No
  • Плагіни:
    No
  • Готовність до друку:
    No
  • 3D Скан:
    No
  • Зміст для дорослих:
    No
  • PBR:
    No
  • Геометрія:
    Polygonal
  • Розгорнуті UVs:
    Unknown
  • Перегляди:
    1187
  • Дата: 2023-11-05
  • ID Товару:
    472879
It is an application of screw-nut drive for removing a bush (in green) out of a hole (in yellow).
Three blue springs tend to turn out three blue hooks
Red slider can’t rotate due to grey cross pin sliding in slots made on transparent cylinder.

For removing the bush:

Hold the puller by one hand and place it on the bush.
Turn cyan nut counterclockwise by other hand to move the slider down until the hooks hook onto the bush.
Turn cyan nut clockwise to move the slider up (to pull the bush out of the hole).
Once the bush is out of his hole, press radially the hooks with fingers, the bush will fall down Готовність до друку: Ні
Потрібно більше форматів?
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!

INTERNAL PULLER 3D Модель step, від yashar20

3d cad design engineering mechanical product internal puller bush internal-puller product-design design-engineer tool remover
До даного товару немає коментарів.