Detección de sonda de pieza moldeada por inyección SolidWorks editable Modelo 3D

Descripción

Injection molded part probe detection SolidWorks editable

1、 Equipment preparation and feeding

The operator places the workpiece to be inspected steadily on the positioning fixture.

The sensor installed at the bottom of the tire detects the workpiece and confirms the completion of feeding.

2、 Automatic detection process

The operator presses the start button, and the system performs the following actions in sequence:

The vacuum suction cup inside the positioning fixture is activated to firmly adhere and fix the workpiece.

The pneumatic slide table rises and drives the three height positioning pins to move synchronously, making their top contact with the top of the probe and the bottom of the hole on the workpiece.

The electric slide table drives the laser ranging sensor to move sequentially to three positioning pin positions, and measures their distance values separately.

The system automatically calculates the height dimension tolerance of the probe based on three ranging values.

3、 Result display and judgment

The detection results are displayed in real-time on the touch screen or display screen.

The system performs automatic judgment:

Size qualified: The green indicator light is on.

Unqualified size: The red indicator light lights up and records the unqualified information.

4、 Cutting and handling of non-conforming products

The operator releases the vacuum suction and removes the workpiece from the positioning fixture.

Disposal of judgment results:

Qualified parts: transferred to the next process.

Unqualified parts: must be put into the designated waste bin.

5、 Security and error prevention locking

A grating detection device is installed at the entrance of the waste bin to confirm whether non-conforming products have been put into use.

If the system determines that it is unqualified, but the grating does not detect the feeding action, then:

The device is automatically locked and cannot start the next detection.

Trigger the sound and light alarm to remind the operator to handle it.

Only after confirming the input of non-conforming products can the equipment be reset and allowed to resume operation.