Portaherramientas de tablero perforado de seis ranuras Modelo de impresión 3D ^nuevo

Descripción

A compact pegboard tool organizer with six nominal 10 mm openings arranged in a 3 × 2 layout. Suitable for screwdrivers, hex drivers and other slender tools with shafts that fit the openings and wider handles that rest on the holder.

The open-bottom design allows tool shafts to extend through the holder. Single-piece construction combines sloping side reinforcements with integrated rear mounting hooks. Installs without additional screws or hardware and can be removed or repositioned.

Pegboard compatibility

• Square holes: 10 × 10 mm
• Hole spacing: 20 mm centre-to-centre
• Panel thickness: 2 mm

Dimensions

Overall size, including mounting features: 50 mm wide × 31.15 mm deep × 32 mm high.

Six nominal 10 mm tool openings. Printed clearance depends on material and printer calibration.

Recommended print settings

• Material: PLA
• Nozzle: 0.4 mm
• Layer height: 0.20 mm
• Walls: 3–4
• Infill: 20–25%
• Scale: 100%
• Supports: depending on orientation; check slicer preview

These settings are suggested starting points.

Print-tested: successfully 3D printed and physically tested by the designer, including mounting fit on the intended pegboard.

Digital download only. No tools, pegboard or physical print are included.