Alucard-Erbstück-Schwert – Castlevania – 3D-druckbare Cosplay-Requisite – Lore Accurate Design 3D Druckmodell

Beschreibung

Castlevania Alucard's Heirloom sword. It is a highly detailed model that is designed for 3D printing. All details are engraves or reliefs. Perfect for Alucard Cosplay

--Dimensions—

There is 2 versions of the sword. One has 180cm total length, lore accurate. Other one has 140cm total length. Better for carrying and playing around (still longer than a average longsword)

--Assembling—

There is 2 version of the sword and 2 version of the scabbard for each sword version. Since all parts are modular, you can make your own version of the sword.
2 versions of the sword: one has total 140cm length, other one has 180cm total length, lore accurate
There are rod slots inside the swords and this rods are crucial. Since the sword is too long, it can't stay linear without a steel rod skeleton inside.
140cm sword has 130cm rod slot inside, 180cm sword has 170cm rod slot inside. The diameter of the rod slot is 5 milimeters.
2 versions of the scabbard: One has leather texture engraved on it. Other one has smooth surface so you can put a real fabric on it. There are both versions of the scabbard for both sizes (140cm and 180cm)
All parts are sliced under 20cm so you can print them with any 3D printer.
Scabbard pieces has external printable dowels for assebling (rectangle shaped). Between them, there are 3mm diameter nail slots for extra durability if you find any.
Don't forget to use a strong glue while assembling the parts

There is 0.5mm tolerance gap between sockets and plugs. İf you use a standart FDM 3D Printer with 0.4mm nozzle, it should be perfect fit. If it's a little loose, don’t worry. The main task of the plugs is to keep them stable and correctly oriented while you are pasting the parts.

--Recommended Printing Options--

I suggest that you have done tolerance and flow rate tests on your 3d printer before you start printing the model. I recommend minimum 3 walls and 40% or more infill rate for all parts, especially for blades. For scabbard, infill rate could be less than 10%. It is a thin and huge print and it costs probably 700gr+ material in total for both sword and scabbard, we don't want it to be fragile. If the plugs and sockets have difficulties or do not enter each other, you could adjust your flow rate or could choose " exclusive " on slicing tolerance option

If you have any questions or requests, feel free to message me. I'll gladly help as much as i can.

don't forget to follow me on instagram! you could reach me on DM and follow my productions as well
@random_but_quality
https://www.instagram.com/random_but_quality

Also you can check my youtube channel! I upload short timelapse and long painting videos of my models
https://www.youtube.com/@randombutquality