Mold for diecast Land Rover tire Scale 1 to 10 3D Druckmodell

$ 10.00
Sie haben $0.00 Credits. Credits kaufen
Mold for diecast Land Rover tire Scale 1 to 10 3D Druckmodell
$ 10.00
Lesezeichen entfernen! Lesezeichen für diesen Artikel setzen
  • Sammlung:
    No
  • Druckfertige:
  • 3D Scan:
    No
  • Erwachsene:
    No
  • PBR:
    No
  • KI-Training:
    No
  • Betrachter:
    869
  • Datum: 2025-05-07
  • Artikel-ID:
    572211

The mold is intended for the tire manufacture from silicone or similar flexible material in scale 1:10. It consists of 2 parts: top and bottom part. Each part can be 3D printed without supports.

 

Mold dimensions 1:10:

- diameter – 114 mm

- height – 32 mm

 

Tire dimensions 1:10:

-        outer diameter – 44 mm

-        inner diameter – 45 mm

-        overall width – 22 mm

 

If you want a different wheel size, simply scale the mold.

 

The bottom mold part has 5 special bosses and Top mold part has 5 special holes to guide mold parts in the closed state. Also, there are 4 slots for ***ter opening with a screwdriver or similar instrument.

In the Top mold part are 4 small holes for material injection.

Both mold parts have 4 holes with diameter 6 mm for bolting it in closed state.

Note! Only the mold! This is not a tire!

Sie brauchen mehr Formate?
Falls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D Szenen und Formate wie .step, .iges, .stp, .sldprt usw!

Mold for diecast Land Rover tire Scale 1 to 10 3D Druckmodell iges, sat, step, stl, Von tommy250max

wheel mold land rover tire silicone printed manufacture mould form
Es gibt keine Kommentare zu diesem Artikel.