English
Español
日本語
Polska
Français
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदी
stepper motor wind turbine 3D Druckmodell
stl max max x_t step
adriancubas
Engineering
$5.00
- Verfügbare Formate: Autodesk 3DS MAX (.max) 504.10 kbParasolid (.x_t) 272.92 kbSTEP (.step) 348.72 kbStereolithography (.stl) 2.15 MB
- Sammlung:No
- Druckfertige:
- 3D Scan:No
- Erwachsene:No
- PBR:No
- Betrachter:3956
- Datum: 2020-11-18
- Artikel-ID:322054
solidworks software (2017) was used for modeling.
in this project, the modeling of the parts for the construction of a small wind turbine was carried out. the propellers come from pvc pipes of 110mm in diameter and 4mm in thickness.
these propellers are attached to a 3a 1.8 degrees per step nema 23 stepper motor.
the propellers can be folded forward for easy portability. the two pairs of wires coming from the stepper motor carry alternating current and must be rectified and filtered to convert it to dc. this project is based on the results obtained in my instructables project:
https://www.instructables.com/portable-savonius-wind-turbine-with-deflectors/
in this instructable a stepper motor was also used as an electrical generator.
files can be 3d printed. abs or petg filaments are recommended.
Mehr lesenin this project, the modeling of the parts for the construction of a small wind turbine was carried out. the propellers come from pvc pipes of 110mm in diameter and 4mm in thickness.
these propellers are attached to a 3a 1.8 degrees per step nema 23 stepper motor.
the propellers can be folded forward for easy portability. the two pairs of wires coming from the stepper motor carry alternating current and must be rectified and filtered to convert it to dc. this project is based on the results obtained in my instructables project:
https://www.instructables.com/portable-savonius-wind-turbine-with-deflectors/
in this instructable a stepper motor was also used as an electrical generator.
files can be 3d printed. abs or petg filaments are recommended.
Sie brauchen mehr Formate?
Falls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D Szenen und Formate wie .step, .iges, .stp, .sldprt usw!
Falls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D Szenen und Formate wie .step, .iges, .stp, .sldprt usw!
Download stepper motor wind turbine 3D Druckmodell max x_t step stl Von adriancubas
wind turbine stepper motorEs gibt keine Kommentare zu diesem Artikel.
