English
Español
日本語
Polska
Français
中國
한국의
Українська
Italiano
Nederlands
Türkçe
Português
Bahasa Indonesia
Русский
हिंदी
Laser cut planetary gear type mechanical iris-3 leaf-D130d43 3D Druckmodell
dxf step
monk3947
Mechanical parts
dxf
monk3947
Mechanical parts
dxf
monk3947
Mechanical parts
dxf
monk3947
Mechanical parts
$
9.90
- Verfügbare Formate: Autodesk ArchiCAD (.dxf) 1.91 MB
- Sammlung:No
- Druckfertige:
- 3D Scan:No
- Erwachsene:No
- PBR:No
- Betrachter:2684
- Datum: 2022-09-28
- Artikel-ID:415901
There are 3 leaves. Parts are designed for laser cut, but you can 3d print the parts too. DXF and STL files are included in the attachment. The outer diameter is 130mm, center hole’s diameter is 43mm, and total thickness is 12mm.
DXF files are for laser cutting. Try to make the gap as small as possible when laser cutting, and the thickness is 3 mm.
STL files are for 3d printing. Suggest using resin material when printing.
More: https://www.tanerxun.com/mechanical-iris-shutter-mechanism/.html
What you need to buy are some pins, bolts and nuts.
Pin-Diameter 2mm, length 5mm, 24pcs;
Bolt,washer &Nut-M3, length 16mm, 3pcs.
To move the blades, there are two ways:
1. Rotate the small gear with a tool;
2. Rotate the ring gear.
Mehr lesenDXF files are for laser cutting. Try to make the gap as small as possible when laser cutting, and the thickness is 3 mm.
STL files are for 3d printing. Suggest using resin material when printing.
More: https://www.tanerxun.com/mechanical-iris-shutter-mechanism/.html
What you need to buy are some pins, bolts and nuts.
Pin-Diameter 2mm, length 5mm, 24pcs;
Bolt,washer &Nut-M3, length 16mm, 3pcs.
To move the blades, there are two ways:
1. Rotate the small gear with a tool;
2. Rotate the ring gear.
Sie brauchen mehr Formate?
Falls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D Szenen und Formate wie .step, .iges, .stp, .sldprt usw!
Falls Sie ein anderes Format benötigen, eröffnen Sie bitte ein neues Support-Ticket und fragen Sie danach. Wir können 3D Modelle in folgende Formate konvertieren: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Wir konvertieren keine 3D Szenen und Formate wie .step, .iges, .stp, .sldprt usw!
Laser cut planetary gear type mechanical iris-3 leaf-D130d43 3D Druckmodell dxf, Von monk3947
planetary-gear irisdiaphragm irismechanism lasercutting cncmachining vectoring 3dprint robotic epicyclicEs gibt keine Kommentare zu diesem Artikel.
dxf
monk3947
Mechanical parts
dxf
monk3947
Mechanical parts
dxf
monk3947
Mechanical parts
dxf
monk3947
Mechanical parts
dxf step
monk3947
Mechanical parts
