skyfighter - t-47 3D printmodel

the models individually.

skyfighter
https://es.3dexport.com/3dmodel-skyfighter-204155.htm

t-47
https://es.3dexport.com/3dmodel-ship-t-47-star-wars-204154.htm

skyfighter
nave of the television series v the final battle (the visitors) broadcast between 1983 and 1985 in the united states.

the ship has a total size of 13.3 cm long, 5.1 cm high and 10 cm wide. it can be scaled to the desired size.

you can print the landing gear if you wish, the gl***** can be printed separately, recommended in black.

t-47
the t-47 hovercraft, also known as snowspeeder is a small ship, developed by the incom shipyards, originally as a cargo ship but was modified by the engineers of the rebel alliance to fight under the hostility of the frozen planet of hoth.

the design is very easy to print, you can print in two parts or complete any of the two options have separate windows (attached are the necessary files).
long measures 16 cm, width 12 cm and 4.5 cm high. in the photographic record is the assembly form.

skyfighter
ship
requires support
layer height: 1.5 mm
filling: 20%
print speed: 60 - 70 mm / s
adhesion plate: edge
wall thickness: 1.2 mm or greater

undercarriage
support: no
layer height: 1.5 mm
filling: 20%
print speed: 60 mm / s
adhesion plate: edge
wall thickness: 1.2 mm or greater

crystals
support: no
layer height: 1 mm
filling: 100%
print speed: 60 mm / s
adhesion plate: edge
wall thickness: 0.8 mm or more

t-47
atura layer: 0.15 mm
filling: 20%
adhesion plate: edge 0.8 mm
support: yes
temperature: according to material
print speed: 60mm / s
wall thickness: 1.2 mm or greater