Double-Button Carbon Microphone Works Hula-Cow Style Model do druku 3D

$ 14.99
Double-Button Carbon Microphone Works Hula-Cow Style Model do druku 3D
$ 14.99
Usuń to! Dodaj zakładkę przy tym produkcie
  • Kolekcja:
    No
  • Gotowy do wydruku:
  • 3D Scan:
    No
  • Adult content:
    No
  • PBR:
    No
  • Liczba wyświetleń:
    2588
  • Data: 2023-03-21
  • ID produktu:
    438336
This is the entire body assembly of a 1930s/1940s double-button carbon microphone (It CAN be used as a single-button mic as well)

NOTE: YOU WILL need to build the circuit for this mic! It requires a 9V battery, and power. Instructions/build here:
https://www.youtube.com/watch?v=8nSSCG2xCac

You will need to supply the carbon (crushed, strained, CONDUCTIVE*, carbon pellets for fish tanks works fine, so long as you get granules of consistent size), the screws for the terminals and to hold the mic together, and the diaphragm material.

Assembly tools: Screwdriver, soldering iron, hot glue gun, Ohmmeter or multitester.
Circuit components: 100K Resistor, 900 ohm resistors (x2). 10uF capacitors (x2), XLR plug, Wire.

This is an original design based off of the vintage mics. This one works well and has the hula-cow mascot from our studio on it.

There's another, more fiddly model that's a direct copy of the old mics, as well, but that's a different download.
Potrzebujesz plik w innym formacie?
Jeśli potrzebny Ci plik w innym formacie, zgłoś taką potrzebę przez opcję Support Ticket Konwertujemy produkty na następujące formaty: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Nie konwertujemy scen 3D oraz formaty takie jak .step, .iges, .stp, .sldprt.!

Double-Button Carbon Microphone Works Hula-Cow Style Model do druku 3D stl, Od HalfNote5

microphone vintage working works carbon button antique 1930s 1940s 1920s amelia
Brak komentarzy dla tego produktu.