Small basic house in bricks in N gauge Darmowe Model do druku 3D

3D MODEL DESCRIPTION
Basic 3D house designed by me and a variant of the mediterranean 2 floor house, created to test brick modeling and adding pipes in N scale. It consists of the frame, roof, windows, doors and base. Due to its dimensions, it is ideal for creating blocks of houses or villas. The bricks are modeled and therefore are clearly visible on the N scale!

The scale is 1:150 which makes it suitable for electric model trains in N scale. It is made up of several STL files.

Dimensions:

Base measurements: 6.0 x 7.3 cm.
measures of the house: 4 x 4 x 3 cms.

The structure can be printed without supports although the internal supports of the side windows must be removed later. Print the structure in the best possible quality, as the bricks are visible and to scale.

Recommended colors: Structure in red, roof in gray or similar, doors in brown, windows in white and base in gray.

Optimized for printers of any type.

The categories of each piece are in different STL files.

Although the holes are designed for the correct insertion of windows and doors, the highest quality should still be used to print the latter, and the holes may need to be sanded or polished if necessary.

Glue should be used to attach windows, doors, base and roof, preferably UHU.

It does not include glass transparency, it is suggested to use mica or acetate.

This model is completely FREE.

Note: a second version has been uploaded that thickens the pillars a little for a better impression, improves the length of the glue areas for some windows, tolerances of drains in the base are repaired, the holes of the drains are eliminated and the thickness of the the pipes.

3D PRINTING PARAMETERS
Extrusion temperature: 195-200º
Material: Any, but preferably PLA
Bed temperature: 55-60º
Does it require support?: No, it is only recommended in the full version of the structure