automobile valve assembly machine 3Dモデル

説明

this equipment is the first automatic assembly machine for automobile valve, throttle valve and slide valve switch in china. the bus runs fast and can assemble 800-1000 valve products per hour. the equipment is divided into two machines. first, the product is pre installed. the other machine is the final assembly machine. the second two machines can complete more than ten parts assembly, the operation mode of the equipment is turntable type, which is composed of 10 station and 12 station turntable respectively. the pre installed machine platform is 12 station turntable. first of all, all accessories are manually put into the vibration plate for feeding, feeding and distribution. the vibration plate is customized by different production shapes, so it can be seen from the picture that the size of the vibration plate is large or small, which is also due to the product specification if the size is different, then the material is fed and divided after feeding from the vibration plate. here, the feeding is unified by the direct vibration. the direct vibration also works with the vibration. the material distribution mechanism is different, the product shape is different, and the material distribution method is also different. here, the material distribution is pushed from the bottom to the top, pushed from the left, and the stepper motor rotates to find the position for material separation and comparison for difficult material distribution, we adopt ccd visual positioning method, so the structure in this line basically contains the structure and practice commonly used by the automation equipment. therefore, each station corresponds to different product assembly. after material separation, the product is directly clamped into the turntable by the manipulator for assembly. one station rotates to the next station to complete all accessories pre installation in turn after these actions, the blanking manipulator picks up the semi-finished products and puts them into the conveyor belt, from which the machine is transported to another machine. when the inductor in the conveyor belt detects the entry of the products, it starts to clamp the semi-finished products to the rotating plate in the general assembly platform for the overall assembly of the products. the turntable is distributed by 10 stations, and each station is assembled with one kind of accessories until all the accessories are assembled, from the blanking machine to the blanking box, the above is all the operation principle and operation process of the equipment. due to the large number of equipment positions, the detailed structure and function realization still need to open the drawing for research after downloading. because the drawing is relatively large, the download will be decompressed with 700bm, so select the place where the network is relatively fast to avoid interruption, and the drawing is very complete. all structures are complete it can be seen clearly that it is a very good work for learning reference structure. of course, it can also be used to make similar products. it can be transformed into another different device with only a small change. this is the most valuable analysis and research equipment in the automation industry at present. welcome to download and learn actively. at the same time, thank you for your support and attention. 印刷　準備: いいえ