build plate adjust for 3d printer 3d print model 3Dプリントモデル

$
5.00
を持っています $0.00 クレジット. クレジットを購入する
- 利用可能フォーマット: Stereolithography (.stl) 349.27 kb
- コレクション:No
- 印刷 準備:
- 3D スキャン:No
- 成人コンテンツ:No
- PBR:No
- ビュー:2317
- 日付: 2020-05-24
- アイテム ID:294800
3d print model for adjust the build plate ,make it more easy to turn,and the nut will not move during the print, need to glue the gear to the nut.( its feet to alfawise u50 build plate printer ,but can easly change to any printer.)
3d printing settings depends on the type of material i use super pla ,print speed-40,facing the long side on the build plate(that way dont need much support and can set the support overhang angle to 70,layer hight-.0.3.infill-50%. if you have any questions i would be happy to answer
詳細を読む3d printing settings depends on the type of material i use super pla ,print speed-40,facing the long side on the build plate(that way dont need much support and can set the support overhang angle to 70,layer hight-.0.3.infill-50%. if you have any questions i would be happy to answer
フォーマットが必要ですか?
異なるフォーマットが必要な場合、サポートチケットを開き、注文をしてください。3Dモデルをこれらに変換できます: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 3D シーンは変換しません .step、.iges、.stp、.sldprt などの形式。!
異なるフォーマットが必要な場合、サポートチケットを開き、注文をしてください。3Dモデルをこれらに変換できます: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 3D シーンは変換しません .step、.iges、.stp、.sldprt などの形式。!
build plate adjust for 3d printer 3d print model 3Dプリントモデル stl, から ilankaplan
adjust plate build model 3d gadgetsこのアイテムにコメントはありません。