紅き大将の鎧 3Dプリントモデル

紅き大将の鎧 3Dプリントモデル fbx, blend, fbx, glb, obj, stl, usd, から MRAnyCAD

Imagine stepping into a futuristic battleground wearing this imposing, fantasy-inspired suit of armor! This design combines bold angular shapes with spiky details to give it a dramatic, larger-than-life appearance. Whether you plan to print it at full scale for cosplay or at a smaller scale as a display piece, here are some tips to make your 3D printing process smoother:

- Print Orientation: For a wearable cosplay piece, consider splitting the model into sections (helmet, chest plate, arms, legs, etc.) and orient each part so that the largest flat area faces the build plate. This helps improve bed adhesion.
- Supports: Because of the intricate horns and spiky edges, you’ll likely need supports. Use removable supports or custom support blockers where possible to minimize post-processing cleanup.
- Layer Height: A layer height of around 0.2 mm is a good balance between detail and speed. If you want super-crisp details (especially on the helmet’s horned crest), consider 0.1 mm.
- Infill: For wearable parts, you might want a moderate infill (around 15-20%) to keep it lightweight yet sturdy. If printing purely for display, you can go lower, around 10%.
- Material: PLA is a beginner-friendly choice, but for added durability (especially if you’ll be wearing it frequently), consider ABS or PETG.
- Finishing: After printing, sand the surface gently to remove layer lines, apply a primer, and then paint it with metallic or weathered colors. Add some battle scars or weathering effects for that authentic, battle-worn look!

AI Disclosure:
This 3D model concept is the result of a fun collaboration between an AI 3D generator and an artist’s creativity. We used AI to spark the initial design ideas and then refined the details by hand, ensuring a unique and imaginative final piece!