Hot Wheel - 壁や本棚用のマッチ箱ミニチュアカーケース 3Dプリントモデル

説明

This is a case to store your Hot Wheels collection for decoration on a wall or over a bookshelf.
The sample here shows a 4 cars assembly but you can print it to hold as much you want and grow as your collection.
H85xW35xD35mm space boxes can hold most of standard Hot Wheels miniature cars.

Assembly instructions:
Careful as it has small pieces it is only supposed to handled by adults or under supervision of adults!

Partbody file is the box that will hold the miniature car.
Partlock is the locker to tie one box side to another box side.
Borderlarge Side 40mm file is used to add a frame to the external case on the large side of each box.
BorderSmall Side 40mm is used to add a frame to external case on the small side of each box.
BorderSmall Side Corner A and B 40mm are used on the corners as showed in the images.
Any doubts you can also watch the attached assembly instructions video.

Sample was printed in PLA using 0.20mm layer high and 0.4mm nozzle without supports and only 20% Infill.
3 or 4 layers walls as well top and bottom faces. 印刷　準備: いいえ