predator bust figurine 3d printing assembly 3Dプリントモデル

説明

follow me
facebook: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks
istagram: cody3d1 https://www.instagram.com/cody3d1/
twitter: https://twitter.com/cody3d
artstation: https://www.artstation.com/cody3d/store
youtube: https://www.youtube.com/channel/ucegptsyuzqwuu1fow04_mkw?view_as=subscriber

read well before buying

you are buying only files for 3d printing, no material objects will be sent.
after the purchase you will be sent a link, where you can download the files

predator bust model file stl

designed by cody3d, created with zbrush

the object files in a size of approximately

15 x 8 x 8 cm - 6 x 3.2 x 3.2 inches

the dimensions can be changed to any slicer

compatible with every slicer- simplify3d, care, slic3r, etc ........

payment accepted only with paypal

within three hours, after the purchase, a link will be sent to you, where you can download the files

possible custom files to be ordered
if you have any questions or concerns, please contact us
thank you



recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts,
it is recommended to print with a 4-5 skirt

quality
layer height: 0.1mm*
initial layer thickness: 0.3mm
bottom/top pattern: lines
horizontal expansion: 0.04mm (when entering 0.04mm index, the 3d printer perceives the model as monolith, i.e. as having no hidden layers).
*layer height 0.1mm is recommended for a better quality for the printed model. however, the printing time will double.

as a stl file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. this is why we only test print the most difficult segments of
the model’s parts.

the model's parts have been tested and printed in pla. in case you need advice where to get your filaments from, check our partner's website.

speed setups:
infill speed: 30mm/s
outer shell speed : 30mm/s
inner shell speed: 20mm/s
top/bottom speed: 20mm/s
support speed: 50mm/s
travel speed: 150mm/s
skirt speed: 30mm/s
amount of slower layers: 4
infill:

infill pattern: grid
line distance: 1.5mm
infill overlap: 20%
infill layers: 0
support:

enable support: check
placement: everywhere
overhang angle: 30°
x/y distance: 0.7mm
top distance: 0.2mm
bottom distance: 0.2mm
stair step height: 0.5mm
join distance: 0.7mm
area smoothing: 0.6mm
use towers: check
pattern: grid
line distance: 1.5mm

legal privacy policy: any unauthorized use of my profile, video, pictures or audio in any form or in a forum now or in the future is not permissible without my expressed written consent.
any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation
of my privacy and subject to legal action. by watching this: you acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this
page including images and recording streamed live video available for download. this is intended as, and presented as a one time, live, one view presentation only.
penalties of copyright infringement: by reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing
on his or her rights under the copyright act. the copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence