1951 Pickup 3100 3d printed Cars Old pickup 3D Print Model

The model is combined, all the main parts are presented as separate parts, so they are easily modified or removed.
The *.stl files are in the *.zip archive.
You can print with SLA or FDM printer.

Specs: •1:8 •1:10 •1:12 •1:14 •1:16 •1:18 •1:20 •1:24 •1:25 •1:28 •1:32 •1:35 •1:43 •1:64
The model includes: • Body • Interior • Chassis parts • Wheels • Tires • Windows and gl*****
*INFO*
The Advance-Design is a light and medium duty truck series, their first major redesign after WWII. It was billed as a larger, stronger, and sleeker design in comparison to the earlier AK Series. These trucks were sold with various minor changes over the years.
1951 - Doors now have vent windows, 80 mph speedometer, chrome window handle knobs, and chrome wiper knob.

*The 3D model may differ from the original in the dimensions and appearance of some parts, since information about the dimensions and appearance is taken from open sources.
And often the information is different in different sources.
The author reserves the right to take what dimensions as the basis for creating a 3D model.

**Attention:
-For experienced model builder
-Parts could need some adjustments with files or sand paper
-Take care when you remove the supports
-Parts should be glued.
-Not recommended for kids
-Be careful with the alignment of pieces when gluing.
-Could need some sanding/ adjustments/ cuts / scratch built parts to fit your chassis / model kit / Wheels
-Check dimmensions of your model before printing